Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Abatement Technologies Coil Cleaning: The Austin Owner’s Guide
If your Abatement Technologies air purification unit is short-cycling, throwing an airflow error, or simply not clearing odors the way it did six months ago, the coil is usually where the trouble starts. We stock and install Abatement Technologies-compatible coil cleaning kits and replacement coils for most residential and light-commercial series, with typical installed pricing in Austin running $140 – $310 depending on the model and whether the coil can be cleaned in place or needs full replacement. Most coil cleaning jobs are completed the same visit, and if a replacement coil is required for a unit we service regularly, we can typically have the exact match on the truck or ordered and back within two to three business days.
The way Austin homeowners usually discover this part has failed is gradual: the unit runs longer, the air smells musty even after a filter change, and the front panel feels warmer to the touch than it should. Abatement Technologies purifiers work by pulling air across a charged coil that traps and neutralizes particulates. When that coil is coated in a layer of Central Texas dust, cedar pollen, and the fine gray film that comes from a city full of construction, the unit works harder and does less. We see it regularly in homes off Loop 360 and in Mueller, where the pollen load and the dust load compound each other.
Which Abatement Technologies Models This Applies To
This applies to most Abatement Technologies residential and light-commercial air purification series, including the CAP and HEPA-AIRE lines and the larger PREDATOR and SHIELD units found in medical offices and dental suites around Austin. The coil design shifted between generations: early 2000s units used a single-pass aluminum fin coil, while newer models, roughly 2010 forward, moved to a coated copper-tube coil that holds a charge differently and needs a specific non-acidic cleaning solution. Using the wrong cleaner on the newer coil will strip the coating and shorten its life by years, not months.
To identify the right part, open the access panel and look for the silver data plate on the frame. You’ll find the model number printed there, usually something like CAP1200 or HEPA-AIRE 2000. The serial number tells us the build year, and that matters because Abatement changed coil suppliers three times since 2005. An OEM coil for a 2008 unit will physically fit a 2016 unit, but the electrical connector pinout is different, and forcing the wrong coil wastes your money and can damage the control board. We match by serial number, not just model, for this exact reason. For most Austin homeowners, OEM is the right call on coils; the aftermarket equivalents are inconsistent, and the savings are rarely worth it on a part designed to last a decade.
Styles & brands we work with
Signs Your Abatement Technologies Coil Cleaning Is Failing
- The unit runs constantly but the room never smells clean. A coated coil can’t trap what it can’t contact. The fan is still moving air, but the air is bypassing the coil surface, so odors and particulates pass right through. This is the most common first sign we see in Austin homes with pets or smokers.
- The access panel is noticeably warm. Abatement units are designed to run cool at the panel. When the coil is clogged, the airflow drops, and the unit’s internal temperature climbs. If the panel feels like a laptop left on a couch cushion, the coil is holding heat it shouldn’t.
- The unit trips a breaker or throws an airflow error code. Restricted airflow stresses the blower motor, which draws more amperage. Eventually, the breaker tells you what the motor has been trying to say for weeks. If your unit is on a shared circuit with other appliances, this shows up even sooner.
- You smell a faint electrical or burnt odor when the unit first kicks on. This is the motor working against a clogged coil, not a coil failure itself. Clean the coil promptly, and the odor usually disappears. Ignore it, and the motor follows the coil into failure.
- The coil cleaning light or maintenance indicator won’t reset. On newer Abatement models, the maintenance indicator is tied to a pressure differential sensor, not a timer. If the light stays on after a filter change, the coil is the restriction the sensor is reading.
Replacement Cost & What’s Included
In Austin, figure $140 – $180 for an in-place coil cleaning on most Abatement residential units, including the cleaning solution, rinse, and a post-service airflow test. If the coil is beyond cleaning, which happens when the fins are corroded or the coating has failed, replacement runs $220 – $310 installed for the common CAP and HEPA-AIRE series, parts and labor included. Larger PREDATOR or SHIELD units run higher because the coil itself is bigger and the labor takes longer.
Every job gets a written price before any work begins, and that price holds. No surprise line items, no bait price that doubles once the panel comes off. The price we quote covers the part, the labor, the cleanup, and the testing. If we replace a coil, the repair is covered by our 365-Day Done Right Promise: if it fails within a year, we come back and make it right at no charge, including the second visit. That guarantee is written on every repair invoice, not just mentioned in a brochure.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
The honest split is this: you can safely inspect the coil yourself if you unplug the unit first, which is a genuine safety point because the coil on an Abatement unit carries a charge for several minutes after power is cut. Removing the access panel and visually checking for dust buildup is reasonable. What is not reasonable is attempting to clean a charged coil with a hardware store degreaser, which will strip the coating, or opening a unit still under warranty, which voids the warranty on newer models.
Where DIY goes wrong is the rinse. Abatement coils sit above the control board and blower assembly in most configurations. If water drips down onto the board during cleaning, you have not saved a service call, you have bought a control board. That is a $400 lesson we have watched Austin homeowners learn more than once. Call (940) 461-7203, tell us the model on the data plate, and we’ll give you a straight answer on whether the coil can be cleaned or needs replacement, and a written price before we touch anything.
FAQs
In Austin’s climate, expect 6 to 10 years from a coil, depending on how much the unit runs and how often the pre-filters are changed. Homes near construction corridors or with high pollen exposure on the west side of town see shorter coil life because the coil is doing more work. A coil cleaned properly on a regular schedule can push 12 years.
In most cases, a coil can be cleaned and returned to service rather than replaced. The exceptions are physical damage, which shows up as bent or flattened fins, and coating failure, which appears as a chalky white residue that won’t rinse off. If the coil is corroded or the coating is compromised, replacement is the only honest fix. Call (940) 461-7203 and describe what you’re seeing; we’ll tell you plainly which situation you’re in.
An in-place coil cleaning takes 45 minutes to an hour. A full coil replacement runs 90 minutes to two hours on most residential Abatement units. Larger SHIELD or PREDATOR units take longer. We will give you a time window when we schedule, and the technician arrives with the part in hand when a replacement is planned.
We stock Abatement Technologies coil cleaning kits and the most common OEM replacement coils for the CAP and HEPA-AIRE series on the truck. If your model uses a less common coil, we order it and typically have it in hand within two to three business days. Tell us your model and serial number when you call (940) 461-7203, and we’ll confirm what is on the shelf and what needs ordering before you schedule.
Call Linden Air Duct Austin for Abatement Coil Service
We are an independent service provider, not affiliated with Abatement Technologies, but we have cleaned and replaced their coils in Austin homes for years. We also stock parts for Lennox, Trane, and Carrier systems, so if your purifier is paired with one of those units, we can often handle both in one appointment. Every technician is background-checked, identity-verified, and arrives in a marked uniform with a photo ID badge, and you will get their name and photo before they walk up to your door. That is the Threshold Standard we have operated under since 2004, and it has not changed.
Tell me what the system is doing, and I’ll tell you what it needs, no upsell, no alarm, just the straight answer. When you call, the phone is answered by a live person, any time of day or night. Call (940) 461-7203 for a free estimate, and we will get your Abatement unit breathing right again.
Written by Marcus Veale, Owner, Linden Air Duct Austin at Linden Air Duct Austin, serving Austin and nearby areas.