Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Austin?
Duct repair and sealing in Austin, TX typically costs between $350 and $900 for most jobs, with the average homeowner paying around $550. Minor sealing work on a handful of accessible joints can run as low as $200, while extensive repair across a large attic system with multiple failed connections can reach $1,800 or more. These are real numbers from the Austin market in 2026, not national averages that blur the picture.
Key Takeaways
- Typical cost range: $350 – $900 for most Austin duct repair and sealing jobs.
- Minor sealing only: $200 – $400 when a few accessible joints need mastic or tape.
- Major repair (multiple sections replaced): $1,200 – $2,500 for houses with extensive attic or crawlspace damage.
- Whole-home duct replacement: $4,000 – $12,000 depending on square footage and accessibility.
- Permit requirements: Most duct repair in Austin does not require a city permit unless the work changes the HVAC system’s design or moves duct runs.
- Energy savings: Aeroseal-style sealing and proper mastic work typically cut duct leakage by 20 – 40%, reducing monthly cooling bills in Austin’s climate.
If you want a specific number for your house, call (940) 461-7203. We give a written price before any work begins, every single time. That’s not a promotional line. It’s how we’ve operated since 2004.
Duct Repair & Sealing Cost Breakdown (2026)
Here’s what duct repair and sealing actually costs in the Austin area right now, broken down by job type. These ranges reflect what we see across neighborhoods from Allandale to Buda, from Round Rock down to Dripping Springs.
| Job Type | Typical Austin Cost | What It Includes |
|---|---|---|
| Minor joint sealing (2 – 4 joints) | $200 – $400 | Mastic or aluminum tape on accessible joints, quick leak check |
| Moderate leak sealing (multiple runs) | $400 – $700 | Sealing at plenum connections, branch takeoffs, and visible gaps |
| Duct section replacement (small run) | $350 – $750 | Removing and replacing 5 – 15 feet of damaged flex or rigid duct |
| Major repair (multiple sections, attic) | $1,200 – $2,500 | Replacing collapsed or torn runs, reconnecting plenums, full sealing |
| Aeroseal whole-home sealing | $1,500 – $3,500 | Pressurized aerosol sealing for the entire duct system |
| Full duct replacement (Austin average home) | $4,000 – $9,500 | Complete removal and replacement, varies by home size and access |
The single biggest cost driver is accessibility. In Austin, that usually means attic space. Homes built before the 1990s in neighborhoods like Crestview, Brentwood, and Hyde Park often have tighter attics, lower clearance, and older materials. A duct that runs through a tight corner under a steep roof pitch takes longer to reach, and time is a real line item. Newer construction in places like Mueller or Circle C tends to have more working room, which keeps labor hours down.
Material type matters too. Flexible duct (the insulated, accordion-style tubing you see in most attics) is cheaper to work with, typically $2 – $4 per linear foot in material costs. Rigid sheet metal duct runs $4 – $7 per foot and is more common in higher-end homes or commercial conversions. If your system has a mix of both, the repair quote will reflect that.
One Austin-specific factor: our summers. Ducts in unconditioned attics here regularly sit in 130 – 150°F heat from June through September. That heat degrades tape adhesive, dries out mastic, and causes flex duct insulation to break down faster than in cooler climates. We see more attic duct failures in Austin than our colleagues in Dallas or Houston do, simply because of how long and how hot our summers run.
What Affects Duct Repair & Sealing Pricing in Austin
Duct repair quote numbers vary for real reasons, not because a company is trying to pad a bill. Here’s what actually moves the price.
- Attic access and clearance. A walkable attic with plywood decking is fast to work in. A 1980s ranch-style home in North Austin with blown-in insulation up to the joists and 18 inches of clearance under the peak is slow, hot work. Labor hours are the biggest variable in any quote.
- Duct material and age. Homes built before about 2000 in Central Austin often have gray flex duct with degraded inner liners. If the liner is brittle or has visible tears, patching a section is a stopgap, not a fix. That changes the repair scope and the price.
- Where the leak is. Leaks at the plenum (where ducts connect to the air handler) are common and usually straightforward to seal. Leaks inside a soffit, behind a knee wall, or under a slab foundation are complex jobs that cost more. Slab duct issues in particular are a different category of repair entirely.
- Number of affected runs. A single torn flex run is an isolated job. Five runs with failing connections is a system-wide problem. Each additional run adds material and labor.
- Sealing method. Traditional manual sealing with mastic and UL-listed tape costs less upfront but requires access to every joint. Aeroseal (aerosol sealant injected into the system) costs more but can reach leaks in ductwork that’s physically inaccessible. For older Austin homes with ducts buried in walls or chases, Aeroseal is sometimes the only way to seal everything.
- Permits and code updates. If a repair changes the layout or adds new duct runs, Austin’s building code (following the International Mechanical Code) may require a permit and an inspection. Not every job needs this, but one that does will include those fees in the quote. We’ll tell you upfront if your repair falls into that category.
Our estimator, working with Marcus Veale and the rest of the Linden Air Duct Austin team, walks through all of this with you before any number goes on paper. The written price you get is the price you pay. No surprise line items at the end.
The Cost of Putting Off Duct Repair in Austin
Here’s a number people don’t think about: a duct system with 25% leakage is sending 25 cents of every air-conditioned dollar into the attic. In Austin, where the AC runs hard from May through October, that’s hundreds of dollars a year in wasted cooling. According to data from Austin Energy and the local Home Performance with ENERGY STAR program, the average Austin home loses between 20% and 30% of conditioned air through duct leaks, gaps, and poorly sealed connections.
Repairing and sealing that system often pays for itself in energy savings within two to four years, depending on leak severity and system size. It also reduces dust, evens out room temperatures, and takes strain off your HVAC equipment, which extends its service life. The repair isn’t just about comfort. It’s a line item on your electric bill every single month.
Typical Scenarios: What You’ll Likely Pay
Scenario 1: One Room Isn’t Getting Air
You’ve got a bedroom in the back of the house that’s always five degrees warmer than the rest of the place. In many Austin homes, especially two-story builds in areas like Avery Ranch or Teravista, this means a disconnected or crushed flex duct. Repair usually runs $350 – $650 if it’s a single run of accessible flex. If the duct has collapsed inside a wall cavity, the price can climb to $800 – $1,400.
Scenario 2: High Electric Bills and Weak Airflow Everywhere
Every room is getting some air, but the system feels weak and the bill is higher than it should be. This typically points to leaks at the plenum and at multiple branch connections. A whole-system diagnostic and sealing job runs $500 – $1,200 depending on house size and how many leaks we find. On a 2,500-square-foot house in South Austin or Westlake with a 10 – 14 run system, expect the higher end.
Scenario 3: Visible Damage After a Renovation or Pest Issue
Rats and squirrels in Austin attics chew through flex duct insulation and the inner liner. Renovation crews knock ducts loose. If we’re replacing 15 – 30 feet of damaged duct across a couple of runs, expect $600 – $1,200. If the damage is extensive and the insulation is compromised, the job shifts toward a partial system replacement at $1,500 – $3,000.
How We Price Duct Repair at Linden Air Duct Austin
We give you a written price before any work begins. Every job, no exceptions. When you call (940) 461-7203, here’s what happens:
- We schedule a visit at a time that works for you. A live person answers the phone 24/7, so you’ll never sit through an automated menu.
- Before the technician arrives, you get their name and photo sent to you. When they show up, they’re in a clean, marked uniform and they’ll show you a photo ID badge at the door. That’s the Threshold Standard, and it’s been our operating standard since 2004.
- The tech inspects your ductwork, finds the leaks and damage, and explains what they’re seeing in plain language. No fear-based sales tactics. You get the facts.
- You receive a written quote with exact pricing before you approve anything. The number on that paper is the number on your final invoice.
We use professional-grade equipment from Rotobrush and Nikro, and we work with air-quality products from Honeywell, Aprilaire, Abatement Technologies, and Guardsman. These are brands that HVAC professionals across the country use daily. The equipment matters because proper sealing requires diagnostic tools that show where the leaks actually are, not just where they might be.
Every air duct repair we do in Austin is covered by a written guarantee. If the repair doesn’t hold, we come back and fix it at no charge under our 365-Day Done Right Promise. That’s a free second visit if the repair fails. It’s written on your invoice, not in fine print on a website footer.
How to Save on Duct Repair & Sealing in Austin
We’re not going to tell you to skip the repair. But there are legitimate ways to keep the cost down.
- Combine jobs. If you’re already getting your air ducts cleaned or your dryer vent cleaned, ask about bundling a sealing inspection. You’ll save on the service call fee and the tech is already in your attic.
- Fix small leaks now. A $300 joint sealing job today prevents a $1,200 collapsed-duct repair next summer. Duct leaks get worse under heat load, and Austin’s summers don’t let up.
- Check your insulation. If your attic has thin or compressed insulation in conjunction with leaky ducts, addressing both at once is more cost-effective than doing them separately. Duct sealing is most effective when the attic environment is stable.
- Get multiple quotes, but compare apples to apples. A low bid that doesn’t include sealing all accessible joints isn’t actually cheaper. Ask what the quoted price includes. We’ll always itemize.
- Ask about the guarantee. A repair with no written guarantee isn’t a deal. If the company won’t put it in writing, the repair effectively has no warranty coverage that you can enforce. Our 365-Day Done Right Promise is on every invoice.
Call us at (940) 461-7203 for a free estimate. We’ll come out, inspect your system, and give you a written number. No obligation, no pressure.
Is Duct Repair Cheaper Than Duct Replacement in Austin?
Almost always, yes. Duct repair and sealing typically runs $350 – $900 for the majority of jobs. Full duct replacement runs $4,000 – $9,500 for an average Austin home. That’s a tenfold difference. The decision usually comes down to one question: how much of the system is actually compromised?
If you have two or three damaged runs out of twelve, repair is the obvious choice. If you have eight failing runs, a 30-year-old system, and insulation that’s crumbling, replacement starts to make more sense than pouring repair money into ductwork that will keep failing. A good technician will tell you which side of that line your system is on, and they’ll show you the evidence. When Marcus Veale inspects a job, he photographs what he finds so you can see the condition for yourself.
FAQs – Duct Repair & Sealing Cost in Austin
How much does duct repair cost in Austin?
Most duct repair jobs in Austin cost between $350 and $900. Minor sealing on a few accessible joints starts around $200, and major repairs with multiple duct sections replaced can run $1,200 to $2,500. Call (940) 461-7203 for an exact written quote, free of charge.
How much does Aeroseal duct sealing cost in Austin?
Aeroseal whole-home duct sealing in Austin typically costs $1,500 to $3,500 depending on house size and system complexity. Aeroseal is a pressurized aerosol sealant that reaches leaks inside walls and chases that manual sealing can’t access. It costs more than traditional sealing but is sometimes the only complete solution for older Austin homes.
Is duct sealing worth the money in a hot climate like Austin’s?
Duct sealing typically cuts leakage by 20 – 40%, which in Austin’s climate translates to meaningful cooling savings. If your system is losing 25% of its output into a 140°F attic, sealing those leaks pays for itself in energy bills within a few years. It also reduces dust and improves room-to-room temperature balance.
How long does duct repair take in Austin?
Most repair jobs are completed in half a day to a full day. Minor sealing work takes two to three hours. A major repair with multiple runs replaced can take a full day or slightly more depending on attic access and heat conditions. We’ll give you a time window when we give you the written price.
Can you repair my ducts if I’m not comfortable with someone in the house?
Yes. Every Linden Air Duct Austin technician is background-checked and identity-verified under the Threshold Standard. Before the visit, you receive the technician’s name and photo. At the door, they show a photo ID badge and arrive in a marked uniform. You know exactly who is coming into your home before they get there. Call (940) 461-7203 to schedule.
Do I need a permit for duct repair in Austin?
Most duct repair and sealing jobs do not require a permit in Austin. A permit is typically required only when the work changes the HVAC system’s design or adds new duct runs. We’ll tell you if your job needs one, and the written quote will include any applicable fees.
What’s included in your duct repair guarantee?
Every duct repair from Linden Air Duct Austin includes a written guarantee with the 365-Day Done Right Promise. If the repair doesn’t hold, we return and fix it at no charge. It’s a standing commitment on every single repair job, and it’s written on your invoice.
Call for a Free Duct Repair Estimate in Austin
You deserve to know what the job costs before you agree to it. That’s the whole premise of how we work. Call (940) 461-7203 and talk to a live person, any time of day or night. We’ll schedule an inspection, send you the technician’s name and photo before the visit, and give you a written price before any work starts. No surprises, no pressure. That’s the deal in writing, and it’s been our standard since 2004.
If you want to learn more about what duct repair involves, read our Duct Repair & Sealing in Austin page. Or head back to the home page to see everything we do.
Pricing reflects the Austin market as of 2026. Linden Air Duct Austin offers free estimates – call (940) 461-7203.
Written by the team at Linden Air Duct Austin, operating to the Threshold Standard since 2004.
What Our Customers Say
"Good result and fair price. Had to reschedule once because of their truck trouble, but the new time was smooth and the tech knew the house already."
- Wayne G."Tech arrived with a badge and a printed sheet of what he'd be doing. Ran a camera through the main trunk before and after so I could see the dust difference. Vents smell cleaner already."
- Gina R."Allergy season was brutal for my kid. After the cleaning there was a noticeable drop in sneezing at night. They also replaced a cracked flex duct in the attic."
- Omar D.